Anuncio

Colapsar
No hay anuncio todavía.

hd cloner

Colapsar
X
 
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes

  • hd cloner

    TOOLS USED

    1.xboxhdm ver. 1.7 ( current version 1.9)
    2.Slayers Disk 2.5 final ( for dash version 4920) or Firefuckers x-disk ( for dash version
    5659.03 or live 2.0, needed for kernel over 53xx).

    MAKE YOUR BOOTABLE XBOXHDM CD IMAGE

    1. Unpack xboxhdm_v1.9
    2. After you unpack you find this files under xboxhdm folder:
    a. linux ( folder)
    b. cygwin1.dll
    c. make-DOS-floppy.bat
    d. make-iso-lin.sh
    e. make-iso-win.bat
    f. mkisofs.exe
    g. rawrite.exe
    h. also some other readme files.
    3. Copy files for xbox C:\ drive from slayers disk and put the files in xboxhdm's linux>C
    folder.
    4. You can also copy any E:\ drive files to linux>E folder.
    5. copy your xbox's eeprom.bin to linux>eeprom folder
    6. Double click on make-iso-win.bat, it will bringup command prompt and dump the bootable
    iso same folder.



    SETUP YOUR COMPUTER AND XBOX:

    1. Put you cd/dvd drive in primary slave and xbox hard drive in primary master ( I didnt
    tested with secondery master and slave).



    2. Unlock your xbox hard drive and put it to the primary master. ( If you can, unless there is
    procedure later)

    BOOTING XBOXHDM ( First setup your computer to boot from cd):

    After you boot you will see this screen:



    UNLOCK THE HD:

    After you boot to xboxhdm choose "3"(Boot linux with locking/unlocking utilities). You will
    see this screen:



    write "unlockhd -a" and press enter to unlock you hard drive. make sure you have eeprom.bin
    in linux>eeprom folder.

    After reboot press enter to boot into console and you will be in this screen:



    now write "xboxhd" and press enter, you will see this screen:



    If you have your eeprom.bin in eeprom folder then write "6" and press enter.
    xboxhdm will calculate your hd key and password. If you want then you can write down the info ( Not
    necessary ).



    press enter and you will be in the option screen again.

    BUILD YOU HD FROM SCRATCH:

    After unlocking the hd, write "1" in option screen and press enter. It will bring this screen:



    write "yes" and press enter, now it will build the partition table and reboot:



    note: When you build xboxhdm cd, if you copy any E:\ drive files in xboxhdm>linux>E folder
    then xboxhdm will copy all the files from E folder to partition E:\


    RESTORE YOUR C:\ DRIVE:

    After rebooting go to option screen. Write "2" and press enter. After you hit enter it will ask
    you to write "yes" or "no". Write "yes" and press enter. first it will format your C:\ drive:



    and then if you have proper files in the cd it will copy the files from cd to C:\ drive:



    write "yes" and hit enter. C:\ drive will be copied from cd.

    INSTALLING F:\ Drive or UPGRADE YOUR HARD DRIVE:

    To upgrade your hard-drive do all the above steps. Then again come to the Option screen of
    xboxhdm. Write "4" and press enter. Now xboxhdm will scan your hd tell you if you can have
    F:\ drive or not. If you can you will be asked to write "yes" or "no". Write "yes" and press
    enter. It will make the partition table and reboot:



    After you reboot, once again go to option screen and press "4" again. Your F:\ drive will be
    build:



    And now you are done.

    CLONE EXISTING HD:

    In the welcome screen type "3" and press enter, xbxohdm will list available drives attached
    with primary and secondery ide cable:



    in my case my formatted xbox hd is attached with primary master, cd-drive with primary
    slave and another new blank hd with secondery master. so to start cloning first you have to
    enter your xbox hd's address in my case its "hda". so type "hda" and press enter. from the
    picture you can see theres another hard drive attached to secondery slave and its "hdc" so
    enter "hdc" as destination drive and press enter. Now it will ask for confermation. type "yes"
    and press enter and ur hd will be cloned.

    note: cloning takes extremely long time and there is no progress indicator.. wait around 2-3
    hour to clone a complete 120gb drive. For cloning stock drives, it takes abouta hour.



    now wait few minutes to finish the job. it took me arount 12 minutes to clone the hd with
    nothing extra in xbox hd ( no games, apps, movies only the orinal files) and F:\ drive
    formatted. If you have more stuff in ur xbxo hd it will take more time.

    make sure your new hd is unlocked first and then locked when you are done by the following
    method.

    LOCK/UNLOCK YOUR HD:

    After you boot to xboxhdm choose "3"(Boot linux with locking/unlocking utilities).
    You will see this screen:



    write "lockhd" or "unlockhd" and press enter to lock or unlock you hard drive. make sure you
    have eeprom.bin in linux>eeprom folder.

    DONT FORGET TO LOCK YOUR HD BEFORE YOU SHUTDOWN XBOX
    sigpic
    Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
    Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

  • #2
    Respuesta: hd cloner

    Build, rebuild, clone xbox harddrives.

    Useful tool both for softmodders and modchip users (who can ignore locking issues).

    Initial version : xboxhdm_v1.0.zip
    Current version : xboxhdm_v1.9.zip

    As always - use the info and tools described here at your risk. Don't come whining if something goes wrong...
    You should especially be careful when using the HDD locking tools. Write down and backup any passwords you use.

    (Most tools in this package I'm not personaly responsible for, and can therefore not give any guaranties on their usage. Big thanks to all authors of code I have borrowed and modified. Special thanks to the xbox-linux project. I bow in admiration of what you guys have accomplished).

    Let me start by...
    Giving some advice to people new to softmodding. Softmodding is not without risk and some people do get into trouble. Most of these troubles can be prevented by always ensuring a way to revert the hacks people apply. Basically as soon as you gain access to you xbox you should backup your xbox HD key and eeprom. Most people initially gain access using a game-save hack packed with evox. This app has a backup option that will dump the eeprom to a file as well as the hdd key in a text file. Others gain access by hotswapping and installing a hack this way. In that case let evox or ConfigMagic be the very first app you run and get the backup files. Evox will store the backup files in the location the evox app was installed in (if used from a game save it will be somewhere in E:\UDATA). To my knowledge ConfigMagic stores the backup in the root of the E-drive. Having these files you can always access your xbox HD from the PC, and now in case of a broken drive you can build an xbox HD from scratch. So you can pretty much get out of all HD-related toubles. I feel more safe hacking my xbox knowing this

    What this package does.

    This package will let you create a bootable CD that can access and manipulate/rescue, clone and even rebuild working xbox HD's from scratch. I see this usefull for people who want to :
    •Upgrade their xbox with a larger HD (either by cloning or building from scratch)
    •rescue or rebuild a corrupt xbox HD.
    •Calculate the HD passwd for locked and unlocked HD's
    •Locks and unlocks HDD's with the password automatically calculated from the eeprom.
    •Can also set a Master Password (XBOXSCENE) when locking to allow an unlock later even without the eeprom or the user password.
    •Install the official softmod package including the audio and font hack, Evox and PBL 1.4.1.
    You also have the option to make a patched copy of you MS dashboard to be run from
    Evox when using the font hack. Do not use this package is you do not have a kernel
    below 5530 and dashboard version 4920.
    This is meant to provide users without memcards or any of the exploitable games (MA,SC,007) with an easy to use softmod package.
    •have a stable package to access and delete, move, change files on the xbox HD.
    An included program will also let you rebuild the C-drive alone, which could be very usefull if this has become corrupted, if you are in a clock loop and dont know how to manually restore the C-drive or if you need to downgrade the dashboard.
    This is all done by letting you boot to a small live-linux with fatx support, like xlinux, but with so many more tools and options. Better hardware compatibility due to a updated kernel/syslinux and NTFS support are things to mention. Also from this CD you can boot to DOS and use HD lock/unlock tools.
    The techical details of how this package works are described HERE

    Making your bootable CD

    This package comes as a zip-archive : xboxhdm_vx.x.zip (get it from the usual places). When unpacked you find some files and a folder called linux. Inside linux you find a C and a E folder. In here you can put pretty much what you want to go on your xbox. If you have a working hacked setup (audio or font exploit) you can pack that onto the CD, if you want to use this as a rescue disc it would be more usefull to just put the original xbox system-files (The files from the C-drive - get them from your own backup or from Slayers Evox) in the C-folder and optionally you can put the TDATA and UDATA folders with some game saves (could be some hacked saves) in the E-folder.
    A minimal rescue CD would have something like the following in the C-folder of the linux directory :
    CODE

    Audio
    fonts
    xboxdash.xbe
    xboxdashdata.1012a700
    xodash



    The E-folder can be left empty.
    In the root of this archive (xboxhdm-folder) you find a make-iso-win.bat script. Run this script to produce a bootable iso that you can burn to a CD.
    Also included is a make-DOS-floppy.bat script. This will create a DOS floppy with the unlockx,hdlock,hdunlock tools. This is the best way to run locking/unlocking tools as log files will be written to floppy on succesful locking of a drive (see warning below). If you want to make use of the automatic locking you should make the DOS floppy using the xboxhd tool after booting the xboxhdm CD (see section on the locking/unlocking tools below).

    The Xboxhdm Boot-prompt
    When you boot with this CD in the drive you will be presented with three options :CODE

    _ __ __ _ __ __ ______ __ ___ __
    | |/ // /_ ____ | |/ / / / / / __ \ / |/ /___ _/ /_____ _____
    | // __ \/ __ \| / / /_/ / / / / / /|_/ / __ `/ //_/ _ \/ ___/
    / |/ /_/ / /_/ / | / __ / /_/ / / / / / /_/ / ,< / __/ /
    /_/|_/_.___/\____/_/|_| /_/ /_/_____/ /_/ /_/\__,_/_/|_|\___/_/
    __
    ____ _____ ____/ /
    / __ `/ __ \/ __ /
    / /_/ / / / / /_/ /
    \__,_/_/ /_/\__,_/
    __ __
    ________ _________ _ _____ _______ __ / /_____ ____ / /
    / ___/ _ \/ ___/ __ \ | / / _ \/ ___/ / / / / __/ __ \/ __ \/ /
    / / / __/ /__/ /_/ / |/ / __/ / / /_/ / / /_/ /_/ / /_/ / /
    /_/ \___/\___/\____/|___/\___/_/ \__, / \__/\____/\____/_/
    /____/

    1) Boot VGA console with xbox-drive utilities (default)
    2) Boot text-console with xbox-drive utilities
    3) Boot linux with locking/unlocking utilities
    4) Boot to DOS with HD unlock tools
    (use with caution. Passwd log-files are not saved after reboot)



    The first two options will bring you to the fatx-enabled linux (only difference is the layout). Option three will let you boot to linux with "automatic" locking/unlocking tools available. FreeDOS and let you use the unlockx, hdlock, hdunlock, hddisabl tools. Going from DOS to linux or vice versa you will need to reboot.

    The locking/unlocking tools
    WARNING! Using the locking utilities from CD the tools cannot store any log files with used passwords, as the CD is read-only. It will be stored to the virtual filesystem in RAM but is gone after rebooting. These logs are useful if you accidentially use an incorrect HD passwd. If using the DOS based locking tools (unlockx, hdlock) to lock a drive the passwd used will be written to screen and you will be prompted to write this down. If you run the locking tool from CDROM I furthermore advise you to insert a formatted floppy in your primary floppy-drive and run the command : 'savelog'. This will write the log-files from the locking tools to floppy.

    Be warned that locking HDD's is serious buisness! Don't just fool around with the locking tools and always be sure you backup the passwords you use. Locking the HDD with an unknown password will make the HDD useless if you dont store the log or write down the password!

    From version 1.7 you can lock and unlock a HDD from both the linux and DOS prompt.

    Linux (option 3 from the xboxhdm boot menu) :
    •unlockhd, will get the HDD password either from the commandline, a file or automatically generated from an eeprom. It will search the xboxhd CD for the eeprom.bin image. If not found you have the option to insert a floppy with the eeprom of define the path manually. If the eeprom is supplied the tool will unlock and disable locking using a password generated directly from the eeprom.
    •lockhd, will get the HDD password either from the commandline, a file or automatically generated from an eeprom. It will search the xboxhd CD for the eeprom.bin image and likewise lets you tell the tool where to find the image if it wasn't included on the CD. When locking the password is also generated from the eeprom. Moreover the Master Password is also set to 'XBOXSCENE' (without the quotes). You can use this to unlock the HDD if you loose the eeprom password you your eeprom gets lost. Boot the xboxhdm to DOS (option 4) and run the atapwd tools to unlock using Master passwords.
    DOS (option 4 from the xboxhdm boot menu) :
    (The first two tools require that you have bootet xboxhdm to linux (option 1 or 2) and made the DOS floppy from the xboxhd tool.
    •lockhd, will prompt you to choose a drive and will lock the HDD with the password written to the floppy by xboxhd
    •unlockhd, will both unlock the HDD and disable locking with the password written on the floppy
    Should the password generated by xboxhdm be incorrect (bad eeprom dump, or a bug in the password tool <- you can never rule this out completely), you should still be able to unlock the drive again with the password stored on the floppy in : input/hdpass.txt
    •hdlock, Only locks a HDD
    •hdunlock, Only unlocks a HDD but doesn't disable locking. The drive will relock after reboot if you only run this tool.
    •hdddisabl, Disables locking. To be used after hdunlock so that locking stays off after rebooting.
    •unlockx, One option locks a drive, another option unlocks and disables locking in one go. Warning! This tools has been known to not work well with some drives. I recommend hdlock/hdunlock.
    •atapwd. Good for checking the drive security status. Can also be used to unlock with the Master password. If you locked your HDD using the linux tools the Master Password is 'XBOXSCENE'. If you locked it with ConfigMagic the Master password is set to 'TEAMASSEMBLY'
    WARNING! The locking tools are not made by me, so dont make me responsible if something goes wrong. Locking HDD's is not without risk. Until proven otherwise I think the safest choice is to use the linux locking/unlocking tools. Even if the eeprom is bad or the password generation algorithm is wrong the Master Password is set, so you should always be able to unlock using that.

    Final tips - Freeze lock!
    Most PC Bioses seems to enable the Freeze Lock command on unlocked drives on bootup. I guess this is a safety messeaure since you cannot accidently lock or erase prepare a unit when it's frozen. However when the freeze lock is set you cannot relock the drive either. This is rare though and can be disabled in most bioses by disabling automatic hardware detection on bootup on the Primary channel (where the HDD is). We dont need this for booting a CD anyway.
    Remember to reenable automatic detection on primary master after using xboxhdm if your regular PC HDD is on primary master and is the boot device.

    Remember to reenable automatic detection on primary master after using xboxhdm if your regular PC HDD is on primary master and is the boot device.

    If your Bios doesn't support disabling of the auto detection your can try to pull out the IDE cable of the HDD before booting the PC (put with the power cable in the HDD) and put back the IDE cable when you reach the xboxhdm boot menu.

    The xboxhd-tool
    When you boot to linux you will be told that you can start the xboxhd tool by typing 'xboxhd' and pushing enter. This should give you this screen :
    CODE

    __ ___ _ _______ ___ ___ _
    \ \ / / | | | | | _ \ | \/ | | |
    \ V /| |__ _____ __ | |_| | | | | | . . | __ _| | _____ _ __
    / \| |_ \ / _ \ \/ / | _ | | | | | |\/| |/ _' | |/ / _ \ '__|
    / /^\ \ |_) | (_) > < | | | | |/ / | | | | (_| | < __/ |
    \/ \/_.__/ \___/_/\_\ \_| |_/___/ \_| |_/\__,_|_|\_\___|_|


    You have the following options :
    1) Build a new Xbox HD from scratch
    2) Rebuild C-partition on existing Xbox-drive
    3) Clone existing Xbox HD
    4) Install F-drive
    5) Wipe current fatx partition table
    6) Generate HD Key (requires eeprom)
    7) Make DOS floppy with HD lock/unlock tools
    8) Quit

    Make your choice [1-8] :



    As of version 1.6.1 the drive detection mechanism was improved so that you can run the xboxhd tool even if the drive is locked. You will be told that the drive is locked and only the options 6) & 7) will be available to the user. This should let you get the HDD password and generate the DOS floppy boot disk with the nessecary unlocking tools.


    Option 1
    Use this option if you want to build an xbox HD from a blank drive. It is two-step procedure.
    First step is where the partition table is written to disk.
    Second step is where xboxhd will format all fatx partitions and afterwards build the C-partition with the files your put in the C-folder on the CDROM and build the E-partition with the TDATA and UDATA folders you put in the E-folder on the CDROM. If you left the C- and E-folders empty on the CDROM (by mistake or on purpose) you will be prompted to insert a CD with the xbox system-files. The tool will then search for the files.
    You can also choose option 1) for rebuilding an existing xbox HD completely.

    Option 2
    Choose this option if you just want to rebuild the C-partition. This could be used if some system-files have been corrupted, if you are in a clock loop or as a way to downgrade your dash. It is equivalent to the second step described in option 1) above, but only formats and rebuilds the C-partition leaving all game-saves on E: untouched.

    Option 3
    lets you clone an existing xbox HD onto another drive. You will be prompted which device is the source device and which is the destination device.

    Option 4
    Install an F-drive if you HDD is large enough - this is checked!
    Note that when building a HDD from scratch using option 1) the size of the HDD is automatically checked, and if found large enough the user will be given the option to build the F-drive at that stage.

    Option 5
    Use this if a current partition table is corrupted and you want to rebuild the drive from scratch using option 1)

    Option 6
    This will let you calculate the HD unlock key. It requires that you have the eeprom.bin from Evox or ConfigMagic on your CDROM in the eeprom-folder. Current drive status and HD passwd is printed on screen and to file (hdkey.txt).
    In tests this gave the correct key for my HD put write down and (or) save they key anyway so that you can always unlock your drive.

    Option 7
    You will be prompted to insert a floppy and push enter. A DOS floppy with locking and unlocking tools will be created.

    Option 8
    Quit the tool and return to the linux prompt.

    The xbrowser
    Most people dont like typing commands. I included tools to make browsing and manipulating files on the xbox HD more user-friendly. At the command prompt type 'xbrowser' and hit enter. This will mount the CDROM with the linux distribution (and your xbox-files) and if an xbox drive is present on the primary IDE master channel the xbox C- and E-drives will be mounted. Then a semi-graphical filemanager (Midnight-Commander) will open with a tabbed (two-window) view of you CDROM on the left and the xbox C- and E-drive on your right.
    You can also start the xbrowser with 'xbrowser -HD'. It will then search for fatx drives on Primary and Secondary master and run the two panel window with one HD on each side. This allow easy HD to HD copy.
    CODE

    +<-/CD/----------------------------------------v>++<-/xbox-------------------------------------------v>+
    | Name | Size | MTime || Name | Size | MTime |
    |/.. |UP--DIR| ||/.. |UP--DIR| |
    | ABOUT_THIS_CD.txt | 1392|Apr 14 17:48|| C | 4096|Apr 14 17:48|
    | C | 4096|Apr 14 17:30|| E | 4096|Apr 14 17:48|
    | E | 4096|Apr 14 17:30|| | | |
    | check | 0|Apr 14 17:30|| | | |
    | isolinux | 4096|Apr 19 02:13|| | | |
    | readme.txt | 6013|Apr 18 21:47|| | | |
    | xbox | 4096|Apr 14 17:30|| | | |
    | | | || | | |
    | | | || | | |
    | | | || | | |
    | | | || | | |
    | | | || | | |
    | | | || | | |
    +------------------------------------------------++----------------------------------------------------+
    |/.. ||/.. | | |
    +------------------------------------------------++----------------------------------------------------+
    GNU Midnight Commander 4.6.0
    $
    1Help 2Menu 3View 4Edit 5Copy 6RenMov 7Mkdir 8Delete 9PullDn 10Quit



    Some hint on using this tool :
    - Current dir is in the top of each windows.
    - Switch the curser between left and right windows with TAB
    - Move the curser with the arrow-keys.
    - Placing the curser on the very top dir (../) and hitting enter will go on directory up.
    - File/dir manipulation-commands are issue with the F-keys according to the list of commands in the bottom of the windows.

    Example : To rename Xbox.xtf to Xbox.bak in the font-dir on the xbox-drive hit:
    - TAB to switch to the right window.
    - down-arrow + enter to go to C-directory.
    - twice down-arrow and enter to go to fonts folder
    - twice down-arrow to go to Xbox.xtf
    - F6 to bring up Move/rename box.
    - Write Xbox.bak and hit enter to perform rename.
    Simple!

    The Softpack
    Available 'the usual places' is the official softmod package for xboxhdm. This includes the dashboard exploits and PBL and therefore require a kernel version below 5530 and the MS dashboard version 4920. When including this package on the xboxhdm CD the user can run the 'softmod' command and will be given the options to install :
    CODE

    1) The NO-CD new stable audio hack.
    2) The Mech-fonts
    The "Xbox Live" tab will be renamed to PBL
    and will load the Phoenix Bios Loader when pressed.
    3) Phoenix Bios Loader v 1.4.1 with support for Focus chip.
    Only bios included is the 4981.67_ef bios. Include
    more bioses (E:\pbl\Bioses) if you need.
    4) Evox v. 3935.
    Ip = 192.168.0.3
    Subnetmask = 255.255.255.0
    Defaultgateway = 192.168.0.1
    5) Automatically make a patched copy of the MS dashboard (xtf -> bak)
    in C:\ called msdash.xbe to be run from Evox when using
    the font hack. It has been tested only on the 4920
    dashboard from Slayers Evox, but should work on all 4920
    dashboards.



    Read more about the softmod package here

    The UDE package
    A softmod package like the one above.
    Installs the save Evox and PBL version as the softpack mentioned above, but uses the "Ultimate Dashboard Exploit". The advantages over the softpack is that this exploit has NO chance of clock-loops and it boots PBL directly when the xbox is turned on. The 'UDE' command provides install and uninstall options.
    Since no M$ copyrighted code is included in this package the user has to supply the needed update.xbe (the exploitable M$ executable) themselves. The tool will check that it is the correct version, which should hopefully iliminate the chance of people getting a corrupted install.
    Read more about this package here

    Final comments and tips
    Being a fatx enabled linux you can use this distro to manipulate xbox-drive content in any way you wish using linux commands :
    CODE

    ls (to list files and dirs in current working directory)
    ls -l (for extended listing)
    cd dir (for navigating to directory dir)
    cp source dist (to copy file sorce to file dist)
    cp -r source dist (to recursively copy directory source to directory dist)
    mv source dist (to move source to dist)
    rm file (to remove file)
    rm -r dir (to recursively remove directory)
    mkdir dir (to create directory dir)
    mount -t filesys /dev/X dir (to mount device X with filesystem filesys (fatx,ntfs,iso9660) on dir)
    umount dir (to unmount device mounted on dir)




    TIP : Use this filemanager (xbrowser) to install softmods. Before you burn the bootable linux CD you could add a folder (hacks) to the linux directory with all the files needed for the hack (Bert, Ernie, ST.DB, PBL,....). Then use xbrowser to copy files to the xbox HD.

    TIP : Hotswapping with this linux distro is easy. I recommend the following. Place your xbox so that the PC's primary master ide cable will reach the xbox HD. Pull the DVD IDE cable and boot the xbox. It will stop with error 12. At this point the xbox HD is unlocked and will stay this way. Put you xboxhdm bootable CD in the PC and boot. At the boot-prompt it will stop for 5 mins. The bios has done its hardware detection without the xbox HD attached yet - linux still hasn't. So at this boot prompt you pull the ide-cable on the xbox HD, and plug in the primary master ide cable of the PC. Then hit enter to boot to linux. After booting, execute 'xbrowser' to see if the drive was found.

    For more info read the HOWTO's and ReadMe's include in the package.
    sigpic
    Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
    Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

    Comentario


    • #3
      Respuesta: hd cloner

      How to clone a hard drive for Backup or use in another XBOX (v0.1)
      Tutorial written by : Jeepman
      This tutorial assumes:

      - basic hardware skills & knowledge (IDE Master vs. Slave, Jumpers, etc)
      - basic DOS skills, BIOS navigation, etc.
      - that your XBOX either has a mod chip installed that supports Hard drive swap or have the BIOS flashed with a cracked BIOS that support HDD swap.

      Recommendations:

      • Make sure the hard drive you are cloning is fully functional and has on it all the games or apps backed up that you want on the new HDD.
      • Make sure the EvolutionX Dashboard or a Dashboard or your choice is installed on the hard drive you are going to clone. [PHP]([url]http://www.xboxscene.com/articles/evox-install.php[/url])[/PHP]
      • Hard drives should be the same size. (I have not tried with different sizes but since you are doing bit for bit cloning, I would expect problems if the drives are different sizes)

      Instructions:

      1) Make a Norton Ghost 2002 boot disk. (There are other programs that will do bit for bit copying but Norton was the easiest for me here). If you use something else and it don’t work, I reserve the right to say ‘I told you so’).

      2) Set the Jumper(s) on the original hard drive so that the HDD is master and install it into your PC.

      3) Set Jumper(s) on the hard drive to be cloned so that the HDD is slave and install it on the same IDE channel in the PC.
      note: You can do the Original as Master on IDE1, and the Clone as Master on IDE2, but be CAREFUL NOT to kill your original HDD by overwriting the clone to it. Doing as outlined here makes it more ‘obvious’ as to what should be copied where… however, proceed at your own peril.

      4) Make sure your computer CMOS is set to boot to the floppy first and boot the computer off the Ghost 2002 boot disk.

      5) Once the program loads, go to the menu and quit or exit to DOS.

      6) Re-execute Ghost from DOS but this time add the switch “/ir”. At the DOS prompt type: “ghostpe /ir”. This will allow Ghost to simply copy bit for bit on the clone rather than try to read the image on the original HDD as a valid FAT32 or NTFS.

      7) When Ghost has loaded this time, open the menu and go to “Disk” and then “to Disk”.

      8) Select the original hard drive as the source. (If you jumpered the original as the master it will be the top drive to select in the menu and will have a “Raw Image”)

      9) Select the new hard drive as the destination and give her nuts.

      10) This process will take about 45 minutes to clone an 80 gig hard drive depending on your computer speed.

      11) When the clone is finished, the new hard drive should work identical to the original in any modded xbox that supports HDD swap.

      12) Take the hard drives out of the PC and rejumper them to what they were before you installed them into the computer, most likely CS (cable select) or MAS (master).

      13) Install them back into the XBOX or put the back up hard drive in a safe place and you are done.

      14) This will work in place of installing a hard drive and portioning it via ftp if you are swapping hard drives on an xbox. You will just need to find someone with a hard drive you can clone.

      MAKE SURE YOU KNOW WHICH HARD DRIVE IS WHICH WHEN YOU GO TO CLONE THEM. BE CAREFUL BECAUSE YOU CAN DESTROY THE ORIGINAL HARD DRIVE IF YOU ARE NOT CAREFUL.

      If you do torch it, then again, I ‘told you so’. Don’t bug me or msg me… and if your question is something like ‘how do I get into the BIOS?’ then just take your HDD and throw it out the window… ‘cuz when you are done with this tutorial, that is all it will be good for. =)
      sigpic
      Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
      Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

      Comentario


      • #4
        Respuesta: hd cloner

        A quick and easy HD upgrade for all versions of Xbox, but recommended for new, retail HD's. (the best backup there is)
        Things u will need...



        1. An exploited Xbox

        2. Liveinfo from Team-Assembly on you PC.

        3. A PC with either XP or win2k (for running Liveinfo)

        4. UnlockX (or any working app that can lock your HD)

        5. A lockable HD the same size or larger than the original

        6. A program called: "PCI Clone Maxx" from PCInspector. This is free and can downloaded from their website. It is also by far, the easiest and fastest duplicator I have ever used.

        7. Basic PC knowledge


        OK, start by gathering all the required items and installing the software. Now read the documentation that came with each piece of software.
        I will assume that everyone here has read the docs and will not bother with posting a step-by-step guide. I will also assume everyone has read some of my posts and has made their backups and obtained their HD key + EEPROM.



        1. Attach the new HD to your PC as secondary master. (alone on it's cable)

        2. Boot into windows and start Liveinfo.

        3. transfer the HD key and EEPROM.bin to your PC. load eeprom.bin into Liveinfo and obtain the calculated password for the new HD. Print out both HD keys, new and old (HDDinfo.txt), and keep them handy. Dbl-check to make sure they are correct.

        4. Shut down PC and connect original Xbox HD to primary IDE. Only the orig HD attached to first channel, only the new HD attached to second channel.

        5. Take the floppy/ies you created with Clone Maxx and UnlockX on them. (u read the docs, right?) *(note, I ran mine from my SCSI HD, the same setup should work if u have SCSI.) I DO NOT suggest running this from an IDE drive (but should also work).

        6. Boot up to the floppy and use UnlockX to unlock the Xbox HD with the password from the HD key text file.

        7. Start Clone Maxx. (u don't have to reboot, just switch floppies, or if u were smart, they are on the same disk)
        Seleect the original drive as source and the new drive as the target. Wait till it completes.

        8. Re-lock the Xbox HD (original key) after the cloning completes. Power off the PC and remove the drive. Keep it safe somewhere. I reccomend testing it in your Xbox just to be sure u didn't wipe it by mistake.

        9. Attach the new drive to the primary channel of your PC and boot to the floppy again. This time lock the new drive with the calculated password from Liveinfo and then power off.

        10. Attach new HD to Xbox and power on. You're done!


        Although u can use the hot-swap to do this, I wouldn't recommend it to anyone. The only time hot-swap is acceptable is for the first-time exploit install, after that u should have your key + eeprom.bin and hot-swapping should never be needed.
        If u have eeprom.bin but not the HD key file, your can boot into windows and use Liveinfo to calculate the Xbox HD password if u attach the drive to your PC. It will take alot longer to boot with a locked drive attached, but Liveinfo can still calculate the password with your eeprom backup.
        sigpic
        Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
        Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

        Comentario


        • #5
          Respuesta: hd cloner

          Upgrade your Xbox 360 Hardrive
          Published by rs6_n2o on 2006-03-28


          This Tutorial has not been confirmed by our staff to work. We will not be held responsible for any user that attempts this modification.

          Please, try this tutorial instead..

          Upgrade your Xbox 360 HDD Using HDDHackr
          -[PHP] http://www.360-hq.com/xbox-tutorials-64.html[/PHP]

          Required Items
          Ok, heres a list of things you will need.

          1. A motherboard on your computer that supports SATA hard drives
          2. Another SATA hard drive (HDD)
          3. Norton Ghost or any program that will make an exact copy of your existing drive onto the new one
          4. A Torx screwdriver

          Upgrade your Xbox 360 Harddrive
          1. First you will need to take the hard drive off the 360 and take it apart.

          2. Now, connect both the xbox 360 harddrive and the new SATA drive to your computer.

          3. Once both drives are connected run Norton Ghost and clone the original Xbox 360 HDD files over to the new hard drive.

          BE VERY CAREFUL NOT TO OVERWRITE YOUR HDD.. I CAN'T STRESS THIS ENOUGH!!!


          4. Once you have cloned the harddrive take the new hard drive and put it into the Xbox 360 HDD enclosure.

          5. Stick it back onto your Xbox 360 and it should run fine.

          Why Perform this Mod??
          This mod will let you download more games and videos from the live arcade without worrying if you'll run out of space. Also if you are a person who loves to rip your cds to your xbox 360 harddrive then this will be Helpful as well.

          Good luck
          sigpic
          Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
          Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

          Comentario


          • #6
            Respuesta: hd cloner

            Upgrade your Xbox 360 HDD Using HDDHackr
            Published by forahobby on 2008-04-18
            Category: HardDrive | Page Views: 39864

            Introduction
            This tutorial will explain to you how to upgrade your Xbox 360 Harddrive using a program called "HDDHackr". 360-Hq.Com takes no responsibility for users who damage their own equipment in any way, shape or form. The method's listed below are proven to work so whatever you do is at your own risk.

            What is HDD Hackr?
            This tool will allow you to use HDD's that are not 'certified' by Microsoft.
            This specific tool is written for use with the Western Digital BEVS series
            only!

            Required Tools
            - HDDHackr v0.91

            How to use
            Get yourself a Western Digital SATA BEVS HDD. To use this tool, you need
            a HDD security sector file ('hddss.bin'). If you don't have one, here's how
            to create one from a valid xbox 360 HDD:

            * Dumping the hddss.bin file *
            Boot to dos from a writeable medium (like a floppy). Connect an *original*
            xbox 360 HDD to your SATA controller. Make sure it is the only SATA device
            that is connected. Now run 'hddhackr -d'. This will create a file 'hddss.bin'
            and it will save it to the path you've started the hddhackr from.

            * Modding your Western Digital *
            Now turn off your PC and connect the Western Digital and boot to dos again.
            Type 'hddhackr -f' from the same path you have saved the hddss.bin file to.
            This will flash your FW. It will ask if you want to create an undo file. It
            is advised to do so. This will create an 'undo.bin' file that you need if
            you want to undo the hack.

            * Check if it worked *
            Shut down your pc, reboot again to dos and again type 'hddhackr -f'. It
            should now tell you that the drive should work in your x360. If so, connect
            it to your x360 and go to your dashboard/system/memory where you should be
            able to format the drive.

            * Restoring your WD to original state *
            If you don't want to use your modded WD in your x360 anymore and you want to
            flash it back to its original size, then you can now do so. Boot to dos again
            and run 'hddhackr -u'. This will use the undo.bin file you created before to
            restore the drive to its original state.
            Archivos Adjuntos
            sigpic
            Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
            Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

            Comentario


            • #7
              Respuesta: hd cloner

              hola: tenemos varios videos de como hacer el clon hd del xbox360.

              [PHP]http://www.youtube.com/watch?v=3WR9inneEkA&feature=related[/PHP]

              [PHP]http://www.youtube.com/watch?v=vIn0YfK_aHY&NR=1[/PHP]

              [PHP]http://www.youtube.com/watch?v=ivvx7ppDFo8&feature=related[/PHP]

              [PHP]http://www.youtube.com/watch?v=GvnO89lRdC0&feature=related[/PHP]
              sigpic
              Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
              Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

              Comentario


              • #8
                Respuesta: hd cloner

                Xbox Unmodded C partition and Xbox Hard Drive Maker
                **************************************
                Build, rebuild, clone xbox harddrives.
                **************************************

                Useful tool both for softmodders and modchip users (who can ignore locking
                issues).



                What this package does.
                -----------------------

                This package will let you create a bootable CD that can access and
                manipulate/rescue, clone and even rebuild working xbox HD's from scratch. I
                see this usefull for people who want to :

                * Upgrade their xbox with a larger HD (either by cloning or building from scratch)
                * rescue or rebuild a corrupt xbox HD.
                * Calculate the HD passwd for locked and unlocked HD's
                * Locks and unlocks HDD's with the password automatically calculated from the eeprom.
                * Can also set a Master Password (XBOXSCENE) when locking to allow an
                unlock later even without the eeprom or the user password.
                * Install the official softmod package including the audio and font hack,
                * Evox and PBL 1.4.1.
                * You also have the option to make a patched copy of you MS dashboard to
                be run from Evox when using the font hack. Do not use this package is you
                do not have a kernel below 5530 and dashboard version 4920.
                This is meant to provide users without memcards or any of the
                exploitable games (MA,SC,007) with an easy to use softmod package.
                * have a stable package to access and delete, move, change files on the xbox HD.

                An included program will also let you rebuild the C-drive alone, which could
                be very usefull if this has become corrupted, if you are in a clock loop and
                dont know how to manually restore the C-drive or if you need to downgrade the
                dashboard.
                This is all done by letting you boot to a small live-linux with fatx support,
                like xlinux, but with so many more tools and options. Better hardware
                compatibility due to a updated kernel/syslinux and NTFS support are things to
                mention. Also from this CD you can boot to DOS and use HD lock/unlock tools.


                And the Xbox Hard Drive Maker Link..
                sigpic
                Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                Comentario


                • #9
                  Respuesta: hd cloner

                  hola: recuerden que la marca y modelo de este disco duro es :


                  Western Digital Scorpio™ WD1200BEVS 120 GB SATA

                  ya se puede conseguir por unos 50$.
                  solo tienen que hacer lo que dice el tuto y los videos y ya tendran su clone hd.
                  tks
                  sigpic
                  Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                  Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                  Comentario


                  • #10
                    Respuesta: hd cloner

                    TheSpecialist's HDDHackr v0.90 - Adds Support for 120GB Drives!
                    >> TheSpecialist sent us the update of HDDHackr(info) many of you were probably waiting for. With the release of an official 120GB drive by Microsoft you can now use this tool to make your own 120GB Xbox360 HDD using a Western Digital Scorpio BEVS-LAT drive (that's a cheap (~80usd for 120GB) SATA 2.5" PC/laptop drive):
                    Attached is the latest version of the hddhackr. It works with the new 120 gb signature. However, this current version can not dump the hddss.bin file automatically from that drive, you'll have to manually dump sectors 16-22 with a tool like winhex and save them as 'hddss.bin'. After that, continue as normal with the hddhackr and everything will be fine.

                    Also, I'd like to stress that there are 2 versions of the WD BEVS drive out there: the 'RST' and the 'LAT' version. This tool currently ONLY supports the 'LAT' version ! You can find on the sticker of the HDD which version it is. I'll hope to be able to support the RST version of the drive in a future version of this tool.
                    From the official readme:
                    [QUOTE]
                    Hddhacker v0.90 by the Specialist.

                    * DISCLAIMER:
                    This tool has only been tested by me. It worked for me. While great care has been taken, this tool may contain bugs and therefore may seriously harm your HDD. Use at own risk !!!

                    * What: This tool will allow you to use HDD's that are not 'certified' by Microsoft. This specific tool is written for use with the Western Digital BEVS series only !

                    * How to use: Get yourself a Western Digital SATA BEVS HDD. To use this tool, you need a HDD security sector file ('hddss.bin'). If you don't have one, here's how to create one from a valid xbox 360 HDD:
                    - Dumping the hddss.bin file
                    Boot to dos from a writeable medium (like a floppy). Connect an *original* xbox 360 HDD to your SATA controller. Make sure it is the only SATA device that is connected. Now run 'hddhackr -d'. This will create a file 'hddss.bin' and it will save it to the path you've started the hddhackr from.
                    - Modding your Western Digital
                    Now turn off your PC and connect the Western Digital and boot to dos again.
                    Type 'hddhackr -f' from the same path you have saved the hddss.bin file to.
                    This will flash your FW. It will ask if you want to create an undo file. It is advised to do so. This will create an 'undo.bin' file that you need if you want to undo the hack.
                    - Check if it worked
                    Shut down your pc, reboot again to dos and again type 'hddhackr -f'. It should now tell you that the drive should work in your x360. If so, connect it to your x360 and go to your dashboard/system/memory where you should be able to format the drive.
                    - Restoring your WD to original state
                    If you don't want to use your modded WD in your x360 anymore and you want to flash it back to its original size, then you can now do so. Boot to dos again and run 'hddhackr -u'. This will use the undo.bin file you created before to restore the drive to its original state.
                    sigpic
                    Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                    Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                    Comentario


                    • #11
                      Respuesta: hd cloner

                      >>>> SlaYer's EvoX Auto-Installer v2.5 <<<<<beerchug.gif

                      ===================
                      09/01/04 - NEWSFLASH:

                      As promissed, we have released the latest version of the installer at the same time as a new website and dedicated support forums. All forum support will now move to the new official forums.



                      SEE YOU ALL THERE!!!

                      ===================
                      [b]08/21/04 - NEWSFLASH:

                      Just dropping a note to let all our fans know that we have been silent but busy in the background. The new version of the installer is basically finished and we are conductiong final tests as well as documentation edits. At the same time we are working hard on a simultaneous launch of a new website and dedicated forums for your convenience. We think you will be pleasently surprised, and it will all be worth the wait.
                      Also, please note that starting with the next installer version all forum support will be done on the soon to be unvailed, dedicated official SlaYer's Forum.
                      ===================
                      03/23/04 - NEWSFLASH:

                      Well it seems that bad seeds have a way of floating to the surface. One of the former OPs of the official #slaYers irc channel located on snoop.burghcom.com is trying to blackmail us for loosing his priviledges. He has opened up a fake clone of our channel on a different server. His handle is "Scotsman" and after driving away the great SS113, it makes us all sad to see such childish behaviour repeated.

                      Please remember that there is currently only ONE OFFICIAL #SLAYERS IRC CHANNEL, on the great "snoop.burghcom.com" servers. If you go anywhere else you do it at your own risk not to mention getting sucked into a petty personal ego trip & politics.

                      Happy modding!
                      ===================
                      03/10/04 - NEWSFLASH:
                      Due to bandwidth limitation the IRC direct download is no longer available. However, the installer can now be easely obtained using Bit Torrent. See below for details or join the channel as described below and issue the !help Torrent command. On the positive side, the IRC channel now features the latest build of the XBMC.

                      ===================
                      01/16/04 - NEWSFLASH:

                      It has come to my attention that some pathetic individuals have turned my installer into a Trojan. It is truly disgusting to see people behave this way instead of applying their skills to help others in the scene.

                      To combat this, I am releasing here both the MD5 Hash Key and the CRC32 checksum for the real installer.

                      Please keep in mind that the real installer should idealy be obtained from the official IRC channel listed bellow.

                      You can get it anywhere outside of the #slayers channel, but you take a chance. If you do get it somewhere else, use the information below to verify it's an authentic release.

                      Official filename as downloaded is: SlaYers_EvoX_Auto-Installer_v2.5_FINAL.exe

                      Size of file is: 113610630 bytes

                      The MD5 is: bb12d38f6d926ae7199ea6808a86751a

                      The CRC32 is: 1885785732 113610630

                      Hope this helps everyone out and sends a message to those bastards! Enjoy!

                      ===================
                      11/20/03 - NEWSFLASH:

                      90% of all problems posted here relate to the classic "DVD Drive did not read Media properly" This is due to the lack of error checking on the xbox and the fact that the xbox DVD drives are so picky about media.

                      You must burn the installer ISO to a "virgin" CD-RW at 1x or 4x with verify on, but sometimes even that is not enough depending on how stubborn your xbox DVD Drive is.

                      You can try to burn at 1x to a DVD-R with verify or temporarily swap in a PC DVD drive to read the CD-RW or even CD media.

                      Lastly, try different burning software for the ISO if Nero does not work for you.

                      The other 10% of all problems stem from people having old mod chips or old bioses. Since the installer has all the latest tools that expect a new bios, you MUST update your Mod Chip/BIOS to either one from the selection included on the Installer.
                      I strongly recommend the X2 4977 *FC* (read the docs to learn more)

                      ===================
                      [b]11/14/03 - NEWSFLASH:
                      It is driving us crazy in the IRC channel that everyone just comes in without having read this main post or any of the documentation included with the installer. There are 2 manuals included that took months to create, have step-by-step procedures and even screenshots. Almost ALL questions asked in the channel ARE IN THE MANUALS. YOU MUST READ THE MANUALS FIRST!
                      We will not answer questions that have already been covered and answered in the manuals! Thank you for your consideration.
                      ===================

                      First a few Forum Rules:

                      1) DO NOT ASK FOR THIS TOOL HERE!!! - use your favorite newsreader and go to the newsgroups - If your provider sucks, OR just get it from BitTorrent as described in the SlaYer's IRC channel!
                      2) DO NOT PM OR EMAIL ME ASKING FOR THIS TOOL!!!
                      3) IF YOU ARE NOT CAPABLE OF FINDING THIS INSTALLER ON YOUR OWN, YOU PROBABLY SHOULD NOT BE USING IT, AS YOU WILL MORE THANK LIKELY KILL YOUR XBOX!
                      4) Please VOTE then post your feedbacks and enhancement ideas here (within reason and limited by the capabilities of EvoX)
                      5) DO NOT PM OR EMAIL ME WITH QUESTIONS! ASK THEM HERE IN THE FORUM AND DO NOT ASK SPECIFIC QUESTIONS ABOUT FIXING THE INDIVIDUAL TOOLS. Post, do not PM, so that others can be enlightened!

                      ***************** begin IRC Channel Info ******************

                      With the continued assistance of SS113, CoRP5e, Moosta and countless others, our SlaYer's IRC channel will continue to be the best place to go for support and to obtain the latest version. However, please do not abuse it by asking questions already covered in this forum, or in the included documentation, and behave properly. Remember, there is a "SEARCH" option in this forum laugh.gif

                      PLEASE REMEMBER TO READ THIS POST IN IT'S ENTIRETY AND THE NEWS FLASHES AS WE WILL NOT ANSWER QUESTIONS ALREADY COVERED HERE!

                      Use the following information to come and join us on IRC:

                      * IRC Software: Get your free MIRC Client from here! and choose the link closest to you.

                      * IRC Server = snoop.burghcom.com ( IRC Server Join Command = /server
                      snoop.burghcom.com )

                      * IRC Channel = #SlaYerS ( IRC Channel Join Command = /join #SlaYerS )

                      The channel BOTS, will automatically send you what you need if you issue these simple commands:
                      !help - Lists available !help triggers. !help Torrent for example - DO this FIRST!!!!
                      !nfo - sends you both NFO files (open with WordPad to read properly!)
                      !help Torrent - Slayers Installer has been moved to a Torrent. Please type !help Torrent in the channel for the Tracker.
                      !ip or !help IP - info on fixing IP problems
                      !modchip - modchip info
                      !xbmc - bonus! get the latest weekely version of the Xbox Media Center laugh.gif


                      ***************** end IRC Channel Info ******************


                      New SlaYer's EvoX Auto-Installer v2.5 features (built on v2.1):

                      * Includes latest versions of all Xbox homebrew tools and bioses (as of release date)
                      * Support for >137GB HD's and the G: Drive
                      * XBOX v1.0 - V1.5 Support (possible future versions too)
                      * Ability to install EvoX & Apps in F: for Stealth Mode
                      * Ability to restore the retail Xbox HD to retail mode
                      * Ability to Format the F: or G: partitions independently
                      * Latest Stable Media Player XBMP Custom Configured with ShoutCast Radio
                      * Customized X2 4977 *FC* Bios that boot "evoXdash.xbe" 1st from F: then from C: with
                      failover to "default.xbe" on DVD
                      * Further customized X2 4977 *FC* +137GB Bios that adds support for >137GB HD's
                      * Ability to flash virtually ANY v1.0-v1.5 XBOX TSOP and MOD chip with 1MB or 256K
                      * Ability to flash an X2, Chameleon, Akira or any other 1MB Cromwell based MOD chip
                      with X2 4977 *FC* +137G just by inserting this v2.5 installer disk.
                      * Ability to restore the "exploitable" M$ dash if replaced by Xbox Live
                      * Listened to everyone's concearns for size and kept the installer small, around the 105MB mark.
                      * Docs are now released as locked & encrypted PDF's to prevent fake releases

                      Software Included (along with the unchanged tools from v2.1):

                      * EvoX Dash v1.8.3921
                      * XBMP v2.4 CVS 09-24-03 (the 2.4 CVS 10-13-03 release was full of bugs so I ignored it)
                      * HDDLoader v1.2a
                      * dvd2xbox v0.4.9
                      * boXplorer 0.96 G: Patched
                      * BiosChecker v3.1
                      * xbftp v0.61
                      * XCommander R2 G: Patched
                      * Avalaunch 0.48 (can auto-download the Qwix PC ISO Manager)
                      * Xboxdash dvd region free patch disc v1.03

                      Version 2.1 Features Carried Over: Click HERE to See

                      For reference, here are the new Installer Menu options:


                      1) RESET / REBOOT
                      2) Save BIOS / EEPROM (XBOX C:backup)
                      3) REBUILD NEW LARGE HD on V1.X SYSTEM
                      ........3-1) Rebuild v1.X Large HD – *C* 4920
                      ........3-2) Rebuild v1.X Large HD – *F* 4920
                      4) REBUILD RETAIL HD on V1.X SYSTEM
                      ........4-1) Rebuild v1.X Retail HD – 4920
                      5) UPGRADE XBMP, M$ Dash, APPS & EVOX 1.8.3921
                      ........5-1) Inst/Upg XBMP, Apps, EvoX - LARGE HD (F
                      ........5-2) Inst/Upg XBMP, Apps, EvoX - Retail HD (C
                      ........5-3) Inst/Upg just EvoX - LARGE HD (F
                      ........5-4) Inst/Upg just EvoX - Retail HD (C
                      ........5-5) Inst/Upg just XBMP & Apps - LARGE HD (F
                      ........5-6) Inst/Upg just XBMP & Apps - Retail HD (C
                      ........5-7) Inst/Upg just XBMP - LARGE HD (F
                      ........5-8) Inst/Upg just XBMP - Retail HD (C
                      ........5-9) Inst/Restore M$ Dash 1012a700 - Any HD
                      6) FORMAT OPTIONS FOR ANY XBOX V1.X HD
                      ........6-1) Full Clean Format of RETAIL HD
                      ........6-2) Full Clean Format of LARGE HD
                      ........6-3) RESTORE RETAIL XBOX HD TO FACTORY
                      ........6-4) Format only C: Partition
                      ........6-5) Format only E: Partition
                      ........6-6) Format only F: Partition
                      ........6-7) Format only G: Partition
                      7) FLASH XBOX v1.0-1.5 ON-BOARD TSOP OR MOD CHIP
                      ........7-1) Flash 1MB MOD or v1.0-1.1 TSOP w/ EvoX-M7 EjectFix
                      ........7-2) Flash 256K MOD or v1.2-1.5 TSOP w/ EvoX-M7 EjectFix
                      ........7-3) Flash 1MB MOD or v1.0-1.1 TSOP w/ X2-4977
                      ........7-4) Flash 256K MOD or v1.2-1.5 TSOP w/ X2-4977
                      ........7-5) Flash 1MB MOD or v1.0-1.1 TSOP w/ X2-4977 *FC*
                      ........7-6) Flash 256K MOD or v1.2-1.5 TSOP w/ X2-4977 *FC*
                      ........7-7) Flash 1MB MOD or v1.0-1.1 TSOP w/ X2-4977 +137 G:
                      ........7-8) Flash 256K MOD or v1.2-1.5 TSOP w/ X2-4977 +137 G:
                      ........7-9) Flash 1MB MOD or v1.0-1.1 TSOP w/ X2-4978.03
                      ........7-10) Flash 1MB MOD or v1.0-1.1 TSOP w/ EvoX M7+137 G:
                      ........7-11) Flash 256K MOD or v1.2-1.5 TSOP w/ EvoX M7+137 G:
                      8) EEPROM MANAGEMENT
                      ........8-1) Lock Hard Drive
                      ........8-2) UNLock Hard Drive
                      ........8-3) ConfigMagic FINAL (V1.X EEProm Editing)
                      9) NTSC <-> PAL VIDEO MODE SWITCHER
                      ........9-1) USA – NTSC
                      ........9-2) JAP - NTSC
                      ........9-3) EUR - PAL
                      ........9-4) NTSC <-> PAL VIDEO MODE SWITCHER
                      10) Identify Your BIOS/Mod Chip
                      11) System Settings
                      12) Install GentooX Linux v2 Home in F:
                      13) DVD Region Free Patch for M$ Dash
                      14) Power Off Xbox


                      This release will again be a SINGLE solid Self Extracting Archive with included authenticity verification. No need to have the latest WinRAR :-)

                      Distribution filename is:

                      SlaYers_EvoX_Auto-Installer_v2.5FINAL.exe ..... 108MB (approx) [Self Extracting!]

                      On * DO NOT LIST WAREZ CHANNELS * Newsgroups, it will go up in YENC format so make sure your newsreader supports YENC!

                      Make sure to have the Adobe 6 PDF Reader found HERE and read both of the included README and INSTRUCTIONS documents BEFORE using the Installer!

                      I TAKE NO RESPONSIBILITY IF ANYONE MESSES UP THEIR XBOX, SO DO NOT USE THIS TOOL IF YOU DO NOT UNDERSTAND WHAT IT DOES!

                      NOTE: The purpose of the forum is to discuss the toolkit, not hand it to users on a platter. If people are not capable of finding it on their own, after all this information and links, then they should not be using it as it will probably destroy their xbox and they will be back here 10 minutes later crying and saying they "forgot" to make a backup and are now begging for help!

                      Feel free to improve on the installer and make your own but do not use the name "SlaYer" in the name of your installer or posts, except to say "built or based on SlaYer's" Also, please give credit if you reuse my or anyone else's work!

                      Well all that said, please help your fellow users, post your comments/feedbacks, and enjoy this latest version in good health!

                      This post has been edited by SlaYer: Sep 1 2004, 09:16 PM


                      --------------------
                      SlaYer

                      For One-Step any Hard Drive Prepare & Install of EvoX and all the main Apps including XBMP; to flash your Mod or TSOP, edit your eeprom, etc... use my latest all-in-one tool based on the great EvoX:

                      SlaYer's EvoX XBOX Auto-Installer v2.6! (<<- hint, it's a link! :-)
                      (Remember to Backup Your EEPROM & Xbox HD to your PC First!)
                      sigpic
                      Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                      Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                      Comentario


                      • #12
                        Respuesta: hd cloner

                        i would first upgrade
                        and get the Slayer 2.7
                        most of the stuff on 2.6 will work find but be very outdated.

                        After the Xbox is softmodded and can load a burned disc you just copy the Slayer ISO to a DVD-R, stick it in the Xbox and restart the Xbox and it should load right up.
                        Then you install EvoX on your C: partition if the softmod did not already do it.
                        After that you want to look at the E: and F: partition to see which one shows the most space available.
                        There is an option on Slayer that you can install the apps to either one, install them to the partition with the most available space and you should be all set up for the basic stuff.

                        after that if you really want to get technical and pimp his box
                        you can learn how to FTP and edit the EvoX.ini file.
                        With this pretty simple edit you can put links to all of the best apps right on the main EvoX screen. This saves the steps of having to go through 2 or 3 menu's to access your applications that you use most like other dashboards, DVD2Xbox, XBMC and so on.

                        a good softmod program is called SID 3.0 (softmod installer deluxe)


                        SlaYers EvoX Auto-Installer v2.7 released - November 01, 2006

                        Features:

                        * Ability to easely change the default dash between EvoX / XBMC / Ava / UnleashX on any kind of HDD
                        * 137GB HD's and the G: Drive
                        * XBOX v1.0 - V1.6 Support through new v1.6 Bioses (possible future versions too)
                        * Ability to restore the retail Xbox HD to retail mode
                        * Ability to Format the C: E: F: G: or X:,Y:,Z: partitions independently
                        * Latest Stable Media Center XBMC Custom Configured with ShoutCast Radio and lots of cool Scripts
                        * Ability to flash virtually ANY v1.0-v1.6 XBOX MOD chip & some TSOPs with 256K or 1MB
                        * Comprehensive Step-by-Step Instalation and troubleshooting manual, released as locked & encrypted PDF 5.0 for better compatibility

                        Software Included (some new, some cleaned up and updated versions from v2.6):

                        * boXplorer 0.96 G: Patched
                        * dvd2xbox v0.7.7 (with cool Project Mayhem III skin)
                        * EvoX Dash v1.8.3935
                        * XBMC 2.0.0 (10-26-2006 CVS T3CH build) w/ PMIII, X360 & Blackbolt Classic 2.0 Skins
                        * Avalaunch 0.49.3.142 (auto-updatable on-line & can download the Qwix PC ISO Manager)
                        * DVDX v2.0 Region Free
                        * UnleashX Dash V0.37.1218 Build 543
                        * Xboxdash dvd region free patch disc v1.03 (to be used on the older 4920 dash only!)
                        sigpic
                        Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                        Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                        Comentario


                        • #13
                          Respuesta: hd cloner

                          Xbox 360 Hard Drive Upgrade
                          ***************************DISCLAIMER************* **************
                          This tutorial has been tested by me. And it worked great :P
                          While great care has been taken, this tutorial may contain errors.
                          Use this tutorial at your own risk!!!
                          ***************************DISCLAIMER************* **************
                          This tutorial will allow you to use HDD’s that are not ‘certified’ by Microsoft.
                          This specific tutorial is written for use with the Western Digital 120 GB BEVS series ONLY.
                          Drive structure on the Xbox 360 hard drives:

                          Drive contents:
                          Address Length (bytes) Contains
                          0×0000 8192 Null (0×00)
                          0×2000 68 Plain text hard disk info
                          0×2044 24 Static Binary Info (doesn’t change console to console)
                          0×205C 256 Dynamic Binary Data (changes from console to console - possibly encrypted serial number of console)
                          0×2202 2 Size of following PNG file
                          0×2204 2754 MS logo in PNG format (aka hddss.bin), made with Macromedia Fireworks MX 2004 on the 19th of July 2005

                          Partitions:

                          Address Description
                          0×80000 Cache Partition (aka partition 0)
                          0×80080000 Unknown
                          0×120EB0000 Xbox Backwards compatibility drive (aka partition 2)
                          0×130EB0000 Main Xbox 360 Partition (aka partition 3)

                          Notes:

                          * You cannot use a hddss.bin backup from a 20 GB hard drive and use it on a new 120 GB, it will only show 20 GB total size whatever you try
                          * Original Samsung hard drives cannot be used to flash new WD 120 GB disk, it’s currently unsupported
                          * Previous hacked Xplorer360 versions (hacked Xplorer360, Xplorer360 temp1) will have problems with 20 GB drives, use Xplorer360 xtreme

                          Downloads:

                          Xplorer360 xtreme 2: DOWNLOAD
                          hddhackr091.rar: DOWNLOAD

                          XPLORER360 IMAGE AND FILE BACKUP METHOD (recommended)

                          Original drive:

                          1. Open the Xbox hard drive case and remove the hard drive
                          2. Connect to sata connector, boot to clean ms-dos, create hddss.bin backup of original hard drive, hddhackr -d
                          3. Create an image backup of partition 2 (Xbox 1 emulator) using the File -> Backup Partition 2 in Xplorer360 xtreme 2 (you can also extract the files and insert them in partition 2 on the new drive later if you can see partition 2 in Xplorer360)
                          4. Create file backup of partition 3 (Xbox 360 main filesystem) by selecting the partition 3 in Xplorer360 xtreme 2 and Edit -> Extract

                          New drive:

                          1. Flash new drive with 20 GB (for new 20 GB drive) or 120 GB (for new 120 GB drive) hddss.bin (from step 2) using hddhackr -f and at the same time make sure when asked to create an undo firmware file. Ignore any timeout expired error. Shutdown to load the new firmware (reboot won’t reload it)
                          2. Connect drive to Xbox 360 and format using System -> Memory -> Hard Drive -> press Y button, enter the serial number of the machine to allow it to format (you find it on the back of the machine or on System -> System information)
                          3. Move the drive to the computer again, connet to sata, restore the partition 2 image with File -> Restore Partition 2 in Xplorer360 xtreme 2
                          4. Drag all the files from the partition 3 file backup into partition 3 in Xplorer360 xtreme 2
                          5. Test drive in xbox 360, should show 107 GB total size and all the content should be restored successfully

                          XPLORER360 FULL IMAGE BACKUP METHOD

                          1. Complete step 1 and 2 above
                          2. Create a full image backup using File -> Backup Image in Xplorer360 xtreme 2
                          3. Complete step 5 above
                          4. Do full image restore using File -> Restore Image in Xplorer360 xtreme 2
                          5. Boot to ms-dos and execute hddhackr -f once again to write the hddss.bin to sector 16 again (its overwritten when restoring a full backup using Xplorer360)
                          6. Connect to Xbox 360, you will see that total space is ~13gb and none of the file files from the 20 GB backup shows up
                          7. Fix this by formatting in xbox 360, System -> Memory -> Hard Drive -> press Y button, enter the serial number to allow format
                          8. Open the full image in Xplorer360 xtreme 2 and select partition 3 and Edit -> Extract to create a backup of all the files
                          9. Connect disk to computer again, and drag all the files from the partition 3 file backup into partition 3 in Xplorer360 xtreme 2
                          10. Test drive in xbox 360, should show 107 GB total size and all the content should be restored successfully

                          MANUAL METHOD (summarised TheSpecialist way, tested and verified)

                          Complete step 1, 2 and 5 above under XPLORER360 IMAGE AND FILE BACKUP METHOD to backup the old drive and flash the new drive. Only when these steps are done, you can continue to create the partitions below.

                          Create partition 1:

                          If you want to use xplorer360 with the 120 WDBEVS drive, you can now do that:

                          1) First add the missing partition manually starting at byte 0×80000 of your WD BEVS. You need to make it look like:

                          58 54 41 46 00 00 00 00 00 00 00 10 00 00 00 01

                          So, the easy way to do this: open your drive with winhex( [url]http://www.x-ways.net/winhex.zip[/url], registration required to allow write changes disk ) by pressing F9, select your WD BEVS drive, press <ALT>+G, use position 80000 (hexadec) and then edit these 16 bytes starting at 0×80000 to look like above. Save it, restart the xplorer360 Beta 6 and the FATX error should be gone and you should see 2 partitions now. However, there’ll be no data shown yet. if you are using a 120 gb version.

                          2) To get the data shown for an 120 gb wd BEVS, exit xplorer360 and fire up your hexeditor again, but this time open the xplorer360.exe itself with it. Make sure you’re using the beta v6 version. At offset 0xF0C2 you’ll find:

                          68 77 03

                          You need to change these 3 bytes into:

                          00 C2 1A

                          Save it (make a backup !), restart it and you can now see the contents of the WD BEVS 120 gb, at least I can. BTW, this ‘hack’ won’t work with the 20 gb version, so it’s best to make a backup of the xplorer360.exe and use the ‘unhacked’ original version if you want to access a 20 gb hdd !

                          Create partition 2:

                          I did some analysis myself and got it working too Here’s how I did it:

                          1. Open your drive with Winhex (like described before)

                          2. Goto the menu/edit/define block. Choose beginning: 120EB1000 and end: 130EAFFFF and press ‘ok’

                          3. Goto the menu/edit Fill block. Choose ‘Fill with hex values’, enter 00 and press ‘ok’. This will clear the partition.

                          4. Now we have to add the partition headers. Goto offset 120EB0000 and edit to make it look like:

                          120EB0000 58 54 41 46 FF FF FF FF 00 00 00 20 00 00 00 01
                          120EB0010 00 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

                          5. Save it. Now we’re almost done, only have to fix up the ‘cluster map’. To do this, goto offset 120EB1000 and edit it to make it look like:

                          120EB1000 FF FF FF F8 FF FF FF FF 00 00 00 00 00 00 00 00
                          120EB1010 FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00

                          Save it and then your drive will show partition 2 in xplorer360 ! Dump all files from partition 2 from some HDD that has the emulator on it (either a 20 gb or 120 gb, doesn’t matter), save those files from partition 2 to your PC. Attach your WD BEVS drive, and drag the ‘index’ file alone first to partition 2! After you’ve added this particular first file, you can add the rest to the partition. After you’ve copied all files (you should be able to use all xplorer versions by the way, doesn’t matter which one, hexedited/modded or not), your emulator should work.

                          Create Partition 3:

                          Format the drive in Xbox 360, System -> Memory -> Hard Drive -> Press Y button, and enter serial number to allow format.

                          Restore partition 2 and partition 3 as described above.
                          sigpic
                          Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                          Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                          Comentario


                          • #14
                            Respuesta: hd cloner

                            Tutorial Instalar disco duro de 120GB
                            Despues de un rato de estar buscando el disco duro adecuado y de buscar el hddss.bin de un disco de 120 oficial, he logrado completar el proceso con aparente exito ..

                            He de comentar que el tutorial no lo he elaborado solo dado que copie buena parte del tutorial ,agregue algunas cosas que creo facilitarian la tarea

                            Que se necesita?

                            Un disco duro original de 360 (Con carcasa y adaptador)

                            Un disco duro de 120 GB o mayor S-ata de 2.5" Modelo: Western Digital Scorpio BEVS-LAT (Tiene que poner Lat en la etiqueta) Ver imagen

                            El programa HDhackr 0.90(incluye el hddss.bin) Mirror Mirror

                            Dos destornilladores tox N°6 y N°10 para abrir la carcaza de nuestro disco duro original y desmontarlo (tomar en cuenta que al hacer esto quitaras la pegatina de garantia)si tienes dudas respecto a como hacerlo les dejo un videoturorial bastante bueno.


                            Pasos a seguir:

                            1.- Crear un disquet de arranque para realizar el proceso desde Ms-dos. Puedes usar un pendrive si tu motherboard lo permite, puedes usar el el Hack 360 5.2 o el disco de arranque de windows el caso es que inicies en simbolo de sistema

                            2.- Descomprimir el programa hddhackr-0.90 en el disquet de arranque

                            3.- Arrancar sin demas discos duros ni lectores para evitar posibles problemas y en la carpeta donde esten hay que escribir:

                            hddhackr -f

                            Si detecta la unidad seguir los pasos y al acabar reiniciar la maquina.

                            4.- Volver a repetir el proceso para comprobar que sea correcto

                            5.- Guardamos los archivos UNDO.BIN, etc en algun sitio seguro para poder restaurar el disco duro si se quiere volver a usar correctamente en un PC.

                            6.- Montamos el disco duro en la carcaza y luego lo colocamos en nuestra 360 una vez encendida la consola aceedemos al menu sistema / discos para formatearlo. Previamente será necesario apuntarse el numero de serie de la 360 (Sistema > Configuracion Consola > Información del Sistema ) para poder formatear.

                            7.- Ahora ya esta listo para usar con un tamaño de 107 GB. Siempre es normal que aparezca menos tamaño.
                            sigpic
                            Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                            Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                            Comentario


                            • #15
                              Respuesta: hd cloner

                              Tutorial Instalar disco duro de 120GB


                              Despues de un rato de estar buscando el disco duro adecuado y de un disco de 120 oficial....
                              [url]WWW.TESTINGALL.US[/url]




                              Que se necesita?

                              a-Un disco duro DE 120GB original de 360 .

                              b-Un disco duro de 120 GB.Western Digital Scorpio™ WD1200BEVS 120 GB SATA....

                              El programa
                              HDhackr 0.90

                              Dos destornilladores tox N°6 y N°10 para abrir LA CAJA DEL HD.


                              Pasos a seguir:

                              1.- Crear un disquet de arranque para realizar el proceso desde Ms-dos.

                              2.- Descomprimir O COPIAR dentro el programa hddhackr-0.90 en el disquete de arranque.

                              3.- Arrancar sin demas discos duros ni lectores para evitar posibles problemas y en la carpeta donde esten hay que escribir:

                              4-colocamos el disco original del
                              Consola de sobremesa de _Microsoft_.

                              Xbox 360 120gb.

                              5-primero iniciar el proceso de copiar la informacion del disco original.

                              hddhackr -d

                              las dos veces que nos pide y/n
                              la decimos y

                              apagamos el PC.

                              6-ponemos el disco nuevo de wd.Western Digital Scorpio™ WD1200BEVS 120 GB SATA.

                              cuando cargue todo ,escribimos.

                              hddhackr -f

                              nos pide de nuevo y/n
                              le decimos y.

                              7-apagamos el PC.

                              8-ARRANCAMOS DE NUEVO Y CUANDO CARGUE....


                              hddhackr -f

                              ya debe decir que esta listo para usar en el xbxo360.

                              SOLAMENTE CUANDO APARESCA ESTE ANUNCIO ES QUE YA PODEMOS PONERLO EN EL

                              Xbox.



                              9.- Montamos el disco duro en su caja y luego lo colocamos en nuestra 360 una vez encendida la consola aceedemos al menu sistema / discos para formatearlo. Previamente será necesario apuntarse el numero de serie de la 360 (Sistema > Configuracion Consola > Información del Sistema ) para poder formatear.

                              10.- Ahora ya esta listo para usar con un tamaño de 107 GB. Siempre es normal que aparezca menos tamaño.


                              GRUPO YETYCUBA.

                              [url]http://rapidshare.com/files/210390583/hddhackr-0_91.rar[/url]
                              sigpic
                              Todo el material publicado en este foro ha sido descargado exclusivamente de Internet ,de sitios publicos, por lo que este material es considerado de libre distribucion. En ningun A R T I C U L O legal se menciona la prohibicion de material libre, por lo que este foro no infringe en ningun caso, la ley.
                              Piratear la TV de pago es delito. esta web solo da información para el estudio de las mismas.Nunca con la inteción de hacer un uso fraudulento de esta información.

                              Comentario

                              Trabajando...
                              X